Your Cart (0)
Shipping is calculated at checkout.
RAK PowerLink - Smart Power Control for IoT Devices - With Remote Output Control and Remote Reboot Over LoRaWAN®
Prefer another courier for your delivery? Contact us for special shipping arrangements.
Buy from your local authorized seller
The RAK PowerLink - Smart Power Control for IoT Devices - With Remote Output Control and Remote Reboot Over LoRaWAN® is available through our trusted distributors. Choose your region below to visit their website:
The PowerLink RAK9105U is designed for remote power management. It lets you restart the power supply from a distance, reducing the need to send someone on-site.
For LoRaWAN Gateways, the device has a built-in LoRaWAN module. You can use LoRaWAN downlink commands to reboot the gateway remotely.
For devices like CPEs, cameras, or routers, the RAK9105U works if a LoRaWAN network is nearby. It can restart these devices without needing to send someone to the site. This is useful for off-grid installations or remote areas.
Use Cases for Remote Reboot
- Remote Reboot My Gateway: Reboot LoRaWAN gateways or WiFi CPEs without costly site visits.
- Router Remote Reboot: Keep your network running by resetting routers remotely.
- CPE Remote Reboot: Manage LTE CPEs or base stations from anywhere, even in off-grid areas.
- Restart My LoRaWAN Gateway Remotely: Use scheduled or on-demand reboots to maintain system uptime.
Benefits
- Connect the PowerLink to your application or platforms like Datacake and Tago.io. Reboot your gateway easily using a web browser.
- When an issue occurs, reboot immediately to reduce downtime and costs.
- Save money by avoiding travel for on-site maintenance.
How to Install the Power Switch
1. Prepare a Power Source:
- Use a 9V–24V DC power supply (12V is typical) as the input for the RAK9105U.
- Alternatively, use the RAK Battery Plus (RAK9155) for off-grid setups.
2. Connect the Power Input:
- Plug the DC power supply or battery into the power input port of the RAK9105U.
3. Connect Your Router to the Power Output:
- If your router requires 12V, connect it to the 12V/5A DC output port.
- If your router requires 5V, use the 5V/3A Type-C output port.
4. Control the Power:
- Use LoRaWAN commands to control and reboot the power supply to your router remotely.
What’s Included in the Box?
- 1x RAK9105U PowerLink (Dimensions: 105.5x74.4x37.2mm)
- 1x USB Type-C Cable
- 2x DC Cables
- 1x 4-Pin Terminal Block (or 4-Pin Terminal Cable for RAK9155 Battery Plus variant)
FAQs
Why Do I Need a Power Switch for My Networking Devices?
Networking devices like CPEs, WiFi routers, cameras, and LoRaWAN gateways can experience downtime—even in well-designed systems. Power outages or network issues are often beyond your control, requiring travel to the site or hiring a technician.
A power switch allows you to restart these devices remotely, saving time and reducing costs. It also helps minimize downtime, preventing disruptions to operations or customer impact.
If your CPE or other devices are part of a LoRaWAN network or within LoRaWAN network coverage, this power switch integrates seamlessly into the system, enabling smarter device management while reducing maintenance costs.
Which Power Source Should I Use for Devices Like Outdoor Cameras or CPEs?
Check the Device’s Power Requirements:
- If your camera or CPE needs 12V, connect it to the 12V/5A DC output of the RAK9105U.
- If your device uses 5V (such as smaller devices or those with a Type-C connection), connect it to the 5V/3A Type-C output of the RAK9105U.
Choose an External Power Source for the RAK9105U:
- Use a 9V–24V DC power supply (12V is typical) to power the RAK9105U.
- For off-grid setups, use the RAK Battery Plus (RAK9155) as the power input.
Example Setup:
- Outdoor Cameras: Most cameras require 12V. Connect them to the RAK9105U’s 12V DC output.
- CPE Devices: Depending on the power requirement, use either the 12V output or the 5V Type-C output of the RAK9105U.
Documentation
Questions and Answers
Have a Question?
Be the first to ask a question about this.
Product Reviews
Related Products
| Based on LoRaWAN® RAK3172 Module |
Provides communication through LoRaWAN® with low power consumption. Suitable for wide-area remote management.
|
| LoRaWAN® Compatibility |
Compatible with LoRaWAN 1.0.3 specifications.
|
| Supported Frequency Bands |
EU868 / IN865 / RU864 / AU915 / US915 / KR920 / AS923-1-2-3-4 / EU433 / CN470.
|
| LoRaWAN® Mode |
Supports Class C operation.
|
| Firmware |
Uses the RUI3 framework and can be configured through WisToolBox.
|
| LoRa Antenna |
Includes a built-in LoRa antenna; offers an optional IPEX connector for different use cases.
|
|
Power Output
|
Dual DC 12V/5A outputs. One with a remote control and one without. Both match the input power supply.
|
|
5V/3A Type-C output. With remote control.
|
|
|
Power Input
|
Accepts DC 9V–24V (typical DC 12V).
|
|
Compatible with RAK Battery Plus (RAK9155) or a separate DC input.
|
|
| Casing |
PMMA housing supports use in various environments.
|