WisGate Developer D4 / D4+
RAK7244 / RAK7244C / RAK7244P
Available models
- WisGate Developer D4 (RAK7244) - this is the base model with the RPi 4 and the RAK2245
- WisGate Developer D3+ (RAK7244C) - this is the Cellular version that includes the RPI 4, RAK2245, and the RAK2013 Cellular Pi HAT
- WisGate Developer D4P (RAK7244P) this version allows for powering the gateway via PoE by adding the RAK9003 Pi HAT to the base configuration (RPi 4 + RAK2245 + RAK9003)
Product Description
The WisGate Developer D4 (RAK7244) is a successor of WisGate Developer D3 (RAK7243). This device consists of a Raspberry Pi 4, a RAK2245 Pi HAT, which includes a GPS module and a Heat Sink for better performance and thermal heat dissipation management, and an optional RAK2013 Cellular Pi HAT. Its housing is entirely built from aluminum.
The built-in RAK2245 Pi HAT uses the SX1301 RF front-end chip from Semtech, which is a powerful LoRa® digital processing engine. It is able to receive up to 8 LoRa® packets simultaneously sent with different spreading factors on different channels and available in multiple variants so it can be used for all LoRa Alliance® frequency bands. This unique capability allows for innovative network architectures to be implemented, which is advantageous over other short-range systems. The built-in RAK2013 Cellular Pi HAT is based on the EG95 from Quectel, which is an LTE CAT4 module optimized specifically for M2M and IoT applications.
WisGate Developer D4 is a Class A and C compliant that is ideal for prototyping, proof-of-concept demonstrations or for the evaluation of future deployment scenarios. It includes a ready to use Firmware based on Raspbian OS, which makes it possible to connect the Gateway to any standard LoRaWAN® Server. It is developer-friendly as the large Raspbian OS community is a well-established one. It is especially suited to addressing a variety of applications like Smart Grids, Intelligent Farms, and other IoT Enterprise applications.
Complete documentation of this product can be found on our website documentation page.
To know the difference between EG95-E and EG95-NA, please refer to the following table:
| Frequency | EG95-E | EG95-NA |
|---|---|---|
| LTE FDD | B1/B3/B7/B8/B20/B28A | B2/B4/B5/B12/B13 |
| WCDMA | B1/B8 | B2/B4/B5 |
| GSM/EDGE | B3/B8 | |
| Region | EMEA | North America |
| Carrier Certification* | Verizon/ AT&T/ T-Mobile/ Telus/ U.S. Cellular/ Rogers |
* Certifications are for the RAK2013 Cellular Pi HAT Module only, not the whole device.
Key Features
- Refreshed Case design with a new MCU (Raspberry Pi4)
- Preassembled, fully functioning LPWAN developer gateway
- Full LoRaWAN® Stack support (version 1.0.2)
- Supports for 8 channels and spreading factors (SF7-SF12)
- Band support: 433MHz, 470MHz, 865MHz, 868MHz, 915MHz, 920MHz, 923MHz
- Tx Power: 27 dBm Max
- RX Sensitivity: -139dBm
- Integrates Ublox MAX-7Q GPS module
- Quectel EG95 LTE module
Package Contents
-
RAK7244 (Base model)
- 1unit RAK7244 LPWAN Developer Gateway
- 1pc LPWAN Antenna
- 1pc GPS Antenna
- 1pc Power Adaptor
- 1pc SD Card
-
RAK7244P (variant with PoE module)
- 1unit RAK7244P LPWAN Developer Gateway
- 1pc LPWAN Antenna
- 1pc GPS Antenna
- 1pc Power Adaptor
- 1pc SD Card
-
RAK7244C (LTE variant)
- 1unit RAK7244C LPWAN Developer Gateway
- 2x LTE Antenna
- 1pc LoRa® Antenna
- 1pc GPS Antenna
- 1pc Power Adaptor
- 1pc SD Card
Package Details
- Product Dimensions: 68.3mm x 92mm x 53.5mm
Questions and Answers
Have a Question?
Be the first to ask a question about this.
